{"title":"Faber – Pre-treatment \u0026 rising damp","description":"\u003cp\u003eFaber treatments for the back and all six sides of natural stone, against rising damp and salt efflorescence.\u003c\/p\u003e","products":[{"product_id":"hidro-sst-six-side-op-water-basis-impregnatie-1-liter","title":"HIDRO SST – water-repellent impregnator for natural stone","description":"\u003cp\u003e\u003cstrong\u003eProtect your natural stone against moisture absorption, ideally before installation.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eHIDRO SST from \u003cstrong\u003eFaber Stone \u0026amp; Tile\u003c\/strong\u003e is a ready-to-use water-based impregnator that penetrates deep into natural stone. The treatment reduces water absorption and helps prevent moisture-related problems such as yellowing, rust formation, spalling and salt efflorescence.\u003c\/p\u003e\u003cp\u003eThe product does not form a surface film, so the stone stays vapour-permeable. Suitable for indoor and outdoor use.\u003c\/p\u003e\u003ch3\u003eWhy choose HIDRO SST?\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eDeep-penetrating protection\u003c\/strong\u003e against water absorption and rising damp.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eIdeal as a pre-treatment\u003c\/strong\u003e of natural stone before installation.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo surface film:\u003c\/strong\u003e the stone stays breathable.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasier maintenance\u003c\/strong\u003e because dirt adheres less.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReady to use and water-based\u003c\/strong\u003e, described by Faber as VOC-free.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhich materials?\u003c\/h3\u003e\u003cp\u003eHIDRO SST is suitable for marble, granite, limestone, travertine, sandstone, slate, quartzite, porphyry, basaltina and suitable marble agglomerates, among others.\u003c\/p\u003e\u003cp\u003eAlways carry out a test first to assess suitability for the type of stone and finish.\u003c\/p\u003e\u003ch3\u003eProtection before installation\u003c\/h3\u003e\u003cp\u003ePre-treatment helps protect the stone from the installation stage onwards. Depending on the chosen system, the top face and edges can be treated, or all six sides.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlways match the treatment to the adhesive and installation method.\u003c\/strong\u003e For a six-sided treatment with HIDRO SST, Faber prescribes high-performance adhesive or mechanical fixing. See the product data sheet or ask Stone+ for advice.\u003c\/p\u003e\u003ch3\u003eAlso for stone already installed\u003c\/h3\u003e\u003cp\u003eHIDRO SST can also be applied after installation. The stone must be clean and as dry as possible. Moisture already present affects the result.\u003c\/p\u003e\u003cp\u003eExisting yellowing or stains first need suitable cleaning or treatment: HIDRO SST protects the stone but does not remove these discolourations.\u003c\/p\u003e\u003ch3\u003eUse in brief\u003c\/h3\u003e\u003col start='1'\u003e\u003cli\u003eCarry out a test, clean the stone and let it dry as well as possible.\u003c\/li\u003e\u003cli\u003eApply an even coat neat with a brush, roller, lambswool applicator or cloth.\u003c\/li\u003e\u003cli\u003eSpread excess product after about \u003cstrong\u003e5–10 minutes\u003c\/strong\u003e, before it dries.\u003c\/li\u003e\u003cli\u003eFor pre-treatment, wait \u003cstrong\u003eat least 24 hours before installation\u003c\/strong\u003e. Protect a surface treated after installation from water and moisture while it dries.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eWork at a surface temperature of \u003cstrong\u003e+5 to +40 °C\u003c\/strong\u003e, never on wet or overheated stone.\u003c\/p\u003e\u003ch3\u003eCoverage and packaging\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e about 10–15 m² per litre, depending on absorption and the total treated area. With six-sided treatment all treated sides count.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 950 ml and 5 litres.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRead the full product data sheet and safety data sheet before use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNeed advice on your natural stone or pre-treatment? Contact Stone+.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Faber Surface Care","offers":[{"title":"5","offer_id":1570841264148,"sku":"Hidro sst | 5 liter","price":92.75,"currency_code":"EUR","in_stock":true},{"title":"0.95","offer_id":58615395189061,"sku":"Hidro sst | 950 ml","price":19.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1107\/0868\/files\/hidro_sst_1_en_5_liter.png?v=1794519786"},{"product_id":"safe-marble","title":"Faber BS H2O – Protection against rising damp and salt efflorescence in natural stone","description":"\u003cp\u003eMoisture drawn into natural stone from the underside can cause salt efflorescence and other damp problems. \u003cstrong\u003eFaber BS H2O\u003c\/strong\u003e is a water-borne protective product applied to the underside of tiles and slabs before installation.\u003c\/p\u003e\u003cp\u003eIt forms a protective layer that limits capillary moisture absorption while keeping the stone breathable. The treatment also supports good adhesion between the treated stone and the installation adhesive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eProtects against rising damp from the underside.\u003c\/li\u003e\u003cli\u003eHelps prevent salt efflorescence and damp-related damage.\u003c\/li\u003e\u003cli\u003eKeeps the natural stone breathable.\u003c\/li\u003e\u003cli\u003eSupports good adhesion during installation.\u003c\/li\u003e\u003cli\u003eReady to use and water-based.\u003c\/li\u003e\u003cli\u003eSuitable for indoor and outdoor applications.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat is it for?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBS H2O is suitable for pre-treating marble, granite, limestone, travertine, slate, sandstone and quartzite, among others. It is applied to the underside that will later be in contact with the installation adhesive.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePart of a complete pre-treatment\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAlways use BS H2O together with a suitable Faber pre-treatment for the top face and the four edges of the stone. The choice of that protection depends on the type of stone and the application.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to apply\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFirst treat the top face and edges and let them dry. Then apply one even coat of BS H2O neat to the whole clean, dry underside with a brush, roller or lambswool applicator.\u003c\/p\u003e\u003cp\u003eThe material can be moved after about \u003cstrong\u003e15–30 minutes\u003c\/strong\u003e. Wait \u003cstrong\u003eat least 24 hours before installation\u003c\/strong\u003e. Test first on a sample.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePractical information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e about 10–15 m² per litre, depending on the surface.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 1 litre and 5 litres.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e +5 to +40 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCleaning tools:\u003c\/strong\u003e with water after use.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eNeed advice for your natural stone?\u003c\/strong\u003e\u003cbr\u003eContact Stone+ for the right combination of pre-treatment and protection.\u003c\/p\u003e","brand":"Faber Surface Care","offers":[{"title":"1 liter","offer_id":49703302463813,"sku":"BS H2O | 1 liter","price":19.7,"currency_code":"EUR","in_stock":true},{"title":"5 liter","offer_id":49710110540101,"sku":"BS H2O | 5 liter","price":91.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1107\/0868\/files\/BSH2O_5L_500x500_5882d741-748c-4a65-b041-bdedd4d5fcf2.png?v=1794140308"},{"product_id":"dps","title":"DPS – deep-penetrating water-repellent protection for natural stone","description":"\u003cp\u003e\u003cstrong\u003eProtect your natural stone against water absorption while keeping its natural look.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDPS from Faber Stone \u0026amp; Tile is a solvent-based water-repellent impregnator. It penetrates deep into suitable stone and forms no film on the surface. The stone stays vapour-permeable.\u003c\/p\u003e\u003cp\u003eDPS can also be used when renovating surfaces already installed that have previously been affected by moisture, salt efflorescence or oxidation. The surface must be clean, dry and suitably prepared before treatment.\u003c\/p\u003e\u003ch3\u003eWhy choose DPS?\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHigh penetration:\u003c\/strong\u003e also penetrates compact and low-absorbing stones.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWater-repellent protection:\u003c\/strong\u003e helps limit absorption of water and moisture.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo surface film:\u003c\/strong\u003e keeps the stone vapour-permeable.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eUV resistant:\u003c\/strong\u003e suitable for indoor and outdoor applications.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNon-yellowing:\u003c\/strong\u003e according to Faber's product information.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSuitable for renovation:\u003c\/strong\u003e the deeply penetrated protection can remain after later sanding or polishing. Check the protection again after the work.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eWhich materials?\u003c\/h3\u003e\u003cp\u003eDPS is suitable for marble, limestone, travertine, granite, sandstone, slate, quartzite and porphyry, among others. Can also be used on suitable agglomerates, concrete, cement tiles, brick and cement-based joints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlways carry out a test first\u003c\/strong\u003e to assess the absorption, colour and finish of the material.\u003c\/p\u003e\u003ch3\u003eHow to use DPS\u003c\/h3\u003e\u003col start='1'\u003e\u003cli\u003eClean the surface and let it dry completely.\u003c\/li\u003e\u003cli\u003eApply a generous, even coat with a brush, roller, lambswool applicator or cloth.\u003c\/li\u003e\u003cli\u003eOn highly absorbent materials, apply a second coat if needed, wet-on-wet and crosswise.\u003c\/li\u003e\u003cli\u003eAfter the last coat, let the product penetrate for about \u003cstrong\u003e10–15 minutes\u003c\/strong\u003e.\u003c\/li\u003e\u003cli\u003eWipe off any excess with a clean, dry cloth.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003eConsumption and drying time\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e about 10–15 m² per litre, depending on the absorption of the material.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDrying:\u003c\/strong\u003e within about 1 hour according to the technical data sheet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWalkable:\u003c\/strong\u003e after about 4 hours according to the technical data sheet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 1 litre and 5 litres.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eActual absorption and drying time depend on the surface and site conditions.\u003c\/p\u003e\u003ch3\u003eImportant with damp problems\u003c\/h3\u003e\u003cp\u003eDPS protects against water absorption. Existing rust stains, salt residue or loss of shine may need additional cleaning or repair. Also have the cause of the damp problem investigated: an impregnator does not repair leaks or faulty connections.\u003c\/p\u003e\u003ch3\u003eSafe handling\u003c\/h3\u003e\u003cp\u003eRead the label and the full safety data sheet before use. Ensure good ventilation, wear suitable protection and keep the product away from heat, sparks and open flames.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot sure whether DPS suits your stone? Contact Stone+ for advice on product choice and application.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Faber Surface Care","offers":[{"title":"1 liter","offer_id":49703460438341,"sku":"DPS | 1 liter","price":30.95,"currency_code":"EUR","in_stock":true},{"title":"5 liter","offer_id":49719790436677,"sku":"DPS | 5 liter","price":143.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1107\/0868\/files\/DPS_1L_5L_actueel_Faber_500x500_1c95fe2c-16d4-4cca-b00b-0fec459c4292.jpg?v=1794090400"}],"url":"https:\/\/www.stoneplus.be\/en\/collections\/faber-pre-treatment-rising-damp.oembed","provider":"STONE+","version":"1.0","type":"link"}