A1 Yellow – polishing powder for a natural shine

In stock
SKU: A1 Yellow | 5 kg
Regular price €64.75
Verpakking

pH-waarde: pH 2 ± 0.5 (strongly acidic)

Restore and maintain the shine of calcareous natural stone with A1 Yellow from Faber Stone & Tile. This wax-free polishing powder reacts with the stone surface and increases its shine. Suitable for polishing after grinding and for maintaining existing shine.

Why choose A1 Yellow?

  • Natural shine without a wax layer.
  • For restoring shine and periodic shine maintenance.
  • Easy to apply by machine with a white pad.
  • According to Faber, long-lasting resistance to dirt and foot traffic.
  • For suitable surfaces indoors and outdoors.

For which materials?

The technical data sheet lists marble, limestone, travertine and cement- or resin-based marble agglomerates.

The safety data sheet describes the intended use more specifically as a polishing powder for white calcareous materials. Have suitability for coloured or particularly delicate stones confirmed beforehand. Always carry out a test in an inconspicuous spot.

How to use A1 Yellow?

Work on a cleaned surface that is as dry as possible, in areas of about 2 m². Mix the powder with water into a creamy paste and work it in with a single-disc machine, white pad and 150–200 rpm.

Keep the paste creamy while polishing and do not let it dry. After polishing, remove all residue and rinse carefully with water. Follow the product data sheet for the full method.

Coverage and packaging

PropertyData
PolishingAbout 40–50 m² per kg
Shine maintenanceAbout 50–100 m² per kg
Packaging5 kg bucket
Application temperature+5 to +40 °C

Actual consumption and results depend on the type of stone, the finish and the condition of the floor.

Working safely

Danger. Harmful if swallowed or in contact with skin. Causes serious eye damage. Wear suitable protective gloves, clothing and eye/face protection. Read the product and safety data sheets before use.

Not sure whether A1 Yellow is suitable for your floor? Contact Stone+ for advice on your type of stone and the right treatment.

Preparation

Always carry out a test in an inconspicuous spot or on a loose piece of material. The safety data sheet describes A1 Yellow as a polishing powder for white calcareous materials. Have application on coloured or particularly sensitive stone confirmed beforehand.

Remove dust and dirt and protect adjacent surfaces. Work on a surface that is as dry as possible. Slightly damp is permitted; never use the product on a wet or overheated floor. Apply at +5 to +40 °C. With recently laid floors, wait until adhesive and grout have fully cured.

Application and polishing

  1. Work in areas of about 2 m².
  2. Sprinkle 2–3 scoops of powder on the area to be treated.
  3. Add water until a creamy, fluid paste forms. Guideline: about 2 scoops of water per scoop of powder.
  4. Start polishing immediately with a single-disc machine of at least 1.5 HP, fitted with a white pad, at 150–200 rpm.
  5. Spread the paste evenly and make about the same number of passes on each part.
  6. Keep the paste creamy while polishing. Gradually add some water if necessary. Do not let the product dry.

Shine restoration or gloss maintenance

  • After sanding or on heavily worn surfaces: make at least 20–25 passes per section.
  • For gloss maintenance: use about 1–2 scoops of powder per area and make 10–15 passes per section.

Check the shine in between by locally removing some paste with a squeegee. Continue until the maximum achievable shine has been reached.

Finishing

Vacuum up or carefully remove all product residue. Rinse the floor with water. Once all residue has been removed and the floor has been rinsed thoroughly, it can be used again. Clean the tools with water.

Coverage

  • Polishing: about 40–50 m²/kg.
  • Gloss maintenance: about 50–100 m²/kg.

The actual consumption and result depend on the type of stone, the finish and the initial condition. Wear the prescribed protective equipment and read the complete product and safety data sheet before use.

DANGER

  • H302+H312: harmful if swallowed or in contact with skin.
  • H318: causes serious eye damage.
  • Contains oxalic acid and potassium hydrogen oxalate.

Using it safely

Wear suitable protective gloves, protective clothing and eye/face protection. Avoid contact with skin and eyes and avoid dust formation. Ensure good ventilation. Do not eat, drink or smoke during use. Wash hands and face thoroughly after working with this product.

First aid

  • In case of eye contact: rinse immediately with plenty of water for at least 15 minutes, keeping the eyelids open. Remove contact lenses if possible and continue rinsing. Call a Poison Centre or doctor immediately.
  • In case of skin contact: take off contaminated clothing and immediately rinse the skin under the shower. Wash the clothing before reuse.
  • If swallowed: call for medical help immediately. Do not induce vomiting and do not give anything without the express advice of a doctor.
  • If inhaled: move the victim to fresh air and call for medical help immediately.

Storage and disposal

Store in the original, tightly closed packaging in a well-ventilated place, out of direct sunlight. Prevent product or residue from entering drains, soil or water. Have product residue and contaminated packaging processed in accordance with the applicable waste regulations.

Read the label and the complete safety data sheet before use. This text is a summary of Faber SDS A1 Yellow, revision 7 of 09/03/2022.

Value for A1 Yellow according to Faber 2.0 ± 0.5
Stated range 1.5 to 2.5

What does pH mean?
The pH indicates how acidic or alkaline an aqueous solution is. A pH below 7 is acidic, pH 7 is neutral and a pH above 7 is alkaline.

Why is A1 Yellow acidic?
A1 Yellow contains acidic components, including oxalic acid. During wet polishing, the formula reacts with the calcareous stone surface. Together with the mechanical polishing action, this helps to restore the shine.

Explanation of the value
Faber states pH 2.0 ± 0.5 in the technical data sheet, revision 3.0 of 17/10/2022. Because A1 Yellow is a powder, the pH refers to an aqueous solution or mixture. The data sheet does not state the measuring dilution, so this value is not a guaranteed pH for every working mixture.

The safety data sheet states ‘not available’ for pH. The value above comes from the technical data sheet.