AC 300 – Water-repellent protection for cotto and terracotta

In stock
SKU: ac 300 | 1 liter
Regular price €22.15
Liter

pH-waarde: pH 7.5 ± 0.5 (neutral)

Protect porous tiles against water absorption and make grouting and post-installation cleaning easier.

Cotto, terracotta and brick have a natural look, but easily absorb water and dirt. Especially during grouting, grout can be drawn into the pores and leave marks that are hard to remove.

AC 300 from Faber Stone & Tile is a concentrated water-based impregnator that penetrates deep into suitable porous materials. The treatment reduces water absorption and helps protect the material during installation and grouting.

Why choose AC 300?

  • Water-repellent: reduces water absorption in porous materials.
  • Protection before grouting: helps prevent grout soiling from penetrating deep into the tile.
  • Easier final cleaning: makes it easier to remove soiling after grouting.
  • Natural look: according to Faber, keeps the original colour and appearance.
  • No surface film: respects the breathability of the material.
  • For indoors and outdoors: UV resistant and suitable for a wide range of applications.
  • Concentrated formula: dilute with water before use.

Which materials?

AC 300 is specifically developed for cotto and terracotta. The technical data sheet also lists brick, concrete, concrete tiles, marble-cement composite, tuff and porous stone in general.

Always test first in an inconspicuous spot or on an offcut to check suitability for the material and finish.

When to apply?

Preferably use AC 300 before installation or before grouting. Loose tiles can be dipped into the diluted product. On tiles already installed, the product can be applied with a brush, roller or applicator.

Allow at least 24 hours before installation or grouting. Follow the product information and label for the correct dilution and application.

Good to know

AC 300 provides water-repellent protection. For extra protection against oil and other stains, an additional treatment may be needed. The product does not replace the repair of leaks or structural damp problems.

Need advice for your floor or project? Contact Stone+ for the right product choice and application.

Read the label, product data sheet and safety data sheet before use.

1. Preparation
First test in an inconspicuous spot or on an offcut. Remove dust and dirt. Work on a surface that is as dry as possible. Slightly damp is fine, but never apply AC 300 to a wet surface. Protect adjacent materials. Surface temperature: +5 to +40 °C. Let recently applied tile adhesive or grout cure completely.

2. Dilution
Dilute AC 300 with water before use. According to the technical data sheet:

  • Industrial or glazed cotto: 1 part product + 2 parts water.
  • Handmade cotto or more absorbent material: 1 part product + 3 parts water.

Note: the Faber label shown states a different ratio for compact materials. If the label supplied differs from these instructions, have the correct dilution confirmed by Stone+ or Faber before use.

3. Application before laying
Immerse each tile completely in the diluted product for about 10–15 seconds. Remove the tile from the liquid and let it dry. Spread any surface residue with a brush. Wait at least 24 hours before laying.

4. Application after laying, before grouting
Apply a thin, even coat with a brush, roller or applicator pad. Spread any residue with a clean, dry cloth or pad. Highly absorbent materials may need more product. Wait at least 24 hours before grouting, even if the surface appears dry sooner.

5. Finishing and maintenance
Clean tools with water. Collect product residue and rinse water and prevent release into the environment. After post-construction cleaning, wait at least 24–48 hours before a subsequent protective treatment and check that the surface is sufficiently dry.

Read the complete product and safety data sheet before use.

Read the label and the safety data sheet before use.

  • Environment: H412 – Harmful to aquatic life with long lasting effects. P273 – Avoid release to the environment. Do not let product, residue or rinse water enter drains, soil or watercourses.
  • Protection: wear suitable chemical-resistant gloves, tight-fitting safety goggles and protective clothing. Ensure good ventilation. Avoid contact with skin and eyes. Do not eat, drink or smoke during use.
  • In case of eye contact: remove contact lenses if possible. Rinse immediately with plenty of water for at least 15 minutes, keeping the eyelids open. Consult a doctor if symptoms persist.
  • In case of skin contact: remove contaminated clothing and wash the skin with plenty of water. Consult a doctor if irritation persists. Wash clothing before reuse.
  • If inhaled: move the person to fresh air. In case of breathing problems, call for medical help immediately.
  • If swallowed: consult a doctor. Do not induce vomiting without medical instruction. Never give anything by mouth to an unconscious person.
  • Storage: store tightly closed in the original packaging, in a well-ventilated place and out of direct sunlight.
  • Waste: dispose of product residue and contaminated packaging in accordance with local regulations.

This summary does not replace the complete safety data sheet.

GegevenWaarde en uitleg
  • pH of AC 300 7.5 ± 0.5 according to the product sheet.
  • Stated range 7 to 8.
  • Classification Neutral.
  • Neutral pH value 7 at about 25 °C. AC 300 is therefore close to neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does AC 300 have this pH value?

The pH is determined by the chemical composition of the product. The source states the value, but does not explain why exactly this pH was chosen.

What should you watch out for?

Always follow the instructions for use: use the recommended dosage and test first in an inconspicuous spot.

Source: manufacturer's product sheet (NL), as in the downloads for this product.