BUFF N SHINE
Couldn't load pickup availability
pH-waarde: pH 3.3 ± 0.6 (acidic)
Share on your social media
BUFF N SHINE from Faber Surface Care is a water-borne, acid-free crystalliser/polish for quickly refreshing and maintaining the shine of stone-like surfaces.
It is mainly intended as a maintenance product for floors or worktops that are already polished, not as a solution for deep scratches, heavy etching or pronounced wear.
According to Faber, the product can be used on, among others:
- Marble, including dark marbles such as Marquina
- Granite
- Travertine and limestone
- Terrazzo
- Natural stone in general
- Marble agglomerates and certain resin-bound agglomerates
- Concrete and some polished ceramic surfaces, provided they are tested first
The aim is to make an existing polished finish livelier again and visually increase the shine, without a traditional acid crystallisation treatment.
When to use?
BUFF N SHINE is useful when a surface:
- Has lost some of its shine through daily use or cleaning
- Looks slightly dull but is technically still relatively intact
- Needs a quick maintenance polish without heavy renovation
- Is maintained regularly, for example in entrance halls, shops, hotels, showrooms or private natural stone floors.
For real scratches, traffic marks, matt areas with relief or chemical damage, mechanical polishing will usually be needed first.
BUFF N SHINE can then be the maintenance product.
Application in practice
Follow the current technical data sheet for the exact dosage and pad choice, but the practical basics are:
- Clean the surface thoroughly and let it dry completely.
- Apply a limited amount of product to the surface or to the pad.
- Work in small areas with a single-disc machine, usually with a suitable white or red pad depending on the surface and the desired finish.
- Polish until the product is worked in and the surface has an even shine.
- Remove any residue and assess the result before moving on to the next area.
Faber explicitly warns not to apply the product to a wet or strongly heated surface. Always make a test patch first in an inconspicuous spot, especially on delicate limestone, composite or dark materials.
Important points of attention
- Acid-free does not automatically mean risk-free: even with a water-borne product, porosity, existing protective layers, surface texture and previous treatments can affect the result.
- Do not use it to mask a structural problem. For deep wear or scratches, proper mechanical renovation is more durable.
- On honed ceramic or porcelain, testing is essential. For polished ceramic, Faber also offers specific products such as STAR SHINE EASY.
- For floors with an impregnating layer: check on a test patch that the treatment does not change the water and dirt repellency or the appearance of the protective layer.
Quick advice
For a polished marble, granite or terrazzo floor that has only lost some shine, BUFF N SHINE is a logical maintenance choice: fast, acid-free and aimed at restoring shine.
If the floor is etched, heavily worn or really scratched, first treat the cause by grinding/honing/polishing and only use BUFF N SHINE as finishing maintenance.