DECERA/P – Powerful alkaline deep cleaner and wax remover

In stock
SKU: DECERA P | 1 liter
Regular price €6.85
Liter

pH-waarde: pH 12 ± 0.5 (strongly alkaline)

Stubborn grease, old wax layers or built-up maintenance residue on your floor? DECERA/P from Faber Stone & Tile is a concentrated alkaline cleaner for thorough cleaning of natural stone, ceramics and other suitable hard surfaces.

The product helps loosen and remove oil, grease, silicone residue, wax, resins and existing surface treatments. Also suitable for certain cement-based residues on acid-sensitive natural stone, such as marble and limestone, where an acidic cleaner is not appropriate.

Why choose DECERA/P?

  • Powerful degreasing: tackles stubborn and long-accumulated greasy soiling.
  • Removes old layers: suitable for removing wax, resins and certain surface treatments.
  • Versatile: for suitable floors and surfaces indoors and outdoors.
  • Concentrated formula: the dilution is matched to the material and the soiling.
  • Thorough renovation cleaning: can be used together with DEC 21 for double wax stripping, following the prescribed work protocol.

What is it for?

DECERA/P is suitable for marble, limestone, travertine, granite, ceramics, porcelain tiles, cotto, terracotta and concrete, among others. Use it for thorough degreasing, removing old maintenance layers or preparing a suitable surface for a new treatment.

Always carry out a test first to check suitability for the material, the finish and the existing treatment.

How to use

  1. Remove loose dirt and dust. Carry out a test and choose the right dilution.
  2. Apply the solution evenly to a dry surface that is not overheated.
  3. Leave to act for about 10–15 minutes and work regularly with a suitable brush, pad or single-disc machine. Keep a thin layer of product on the surface during treatment.
  4. Add clean water, pick up the dirty solution and rinse thoroughly.

Indicative dosage

  • 10% product: periodic degreasing.
  • 20–30% product: heavy degreasing or suitable post-construction cleaning on acid-sensitive stone.
  • 50% product: stubborn wax, resin and polymer residue.
  • Neat: only for applications where the product data sheet prescribes it.

The percentages indicate the share of product in the total mixed volume. See the product data sheet for the full method.

Available in 1 litre and 5 litres.

Safe use

Danger: causes severe skin burns and eye damage. Wear suitable protective gloves, clothing and eye/face protection. Do not mix with other chemicals, except in the application with DEC 21 explicitly described. Always read the label and safety data sheet before use.

Unsure about your surface or the right approach? Stone+ will help you with product choice and application advice.

Instructions for use DECERA/P

1. Preparation: remove dust and loose dirt. Protect adjacent surfaces and always carry out a test first in an inconspicuous spot. Do not apply to wet or overheated surfaces.

2. Dilution: mix with clean water according to the soiling:

  • 10%: periodic degreasing — 1 part product to 9 parts water.
  • 20–30%: heavy degreasing and suitable post-construction cleaning on acid-sensitive stone.
  • 50%: stubborn wax, resin and polymer residue — 1 part product to 1 part water.
  • Neat: only where the technical product sheet prescribes it.

3. Application: spread evenly with a suitable brush, mop or single-disc machine. Choose a pad that suits the material and the finish.

4. Contact time: leave for about 10–15 minutes to act, scrubbing regularly. Keep the surface covered with a thin layer of product during the treatment; top up if necessary.

5. Picking up and rinsing: add clean water to emulsify the product and dirt. Pick up the dirty solution, preferably with a suitable wet vacuum, and rinse thoroughly with clean water. Repeat if necessary.

On highly absorbent surfaces, work in small areas of about 4–5 m². Let the surface dry completely before applying a new protective treatment.

The percentages indicate the share of product in the total mixed volume. For double wax removal with DEC 21, consult the complete product sheets of both products. Wear suitable protective equipment and follow the label and the safety data sheet.

Safety instructions DECERA/P

Danger: causes severe skin burns and eye damage.

  • Wear suitable protective gloves, clothing and eye/face protection.
  • Avoid contact with skin and eyes. Do not breathe vapours, mist or spray. Ensure adequate ventilation.
  • Do not eat, drink or smoke during use. Wash hands thoroughly after use.
  • Do not mix with other chemicals. Use together with DEC 21 only according to the prescribed working protocol.
  • In case of eye contact: rinse immediately and cautiously with plenty of water for at least 15 minutes. Remove contact lenses if possible and continue rinsing. Call a Poison Centre or doctor immediately.
  • In case of skin contact: immediately take off contaminated clothing and rinse the skin with plenty of water or shower. Call for medical help immediately.
  • If swallowed: do not induce vomiting. Call a Poison Centre or doctor immediately.
  • Prevent release into drains and surface water. Store tightly closed in the original packaging, out of the reach of children.

Always read the label and the current safety data sheet before use.

GegevenWaarde en uitleg
  • pH of DECERA/P 12 ± 0.5 according to the product sheet.
  • Stated range 11.5 to 12.5.
  • Classification Strongly alkaline (basic).
  • Neutral pH value 7 at about 25 °C. DECERA/P is therefore not pH-neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does DECERA/P have this pH value?

Alkaline cleaners break down grease, oil, wax, polymers and other organic dirt. The higher the pH, the stronger the degreasing and stripping effect.

What should you watch out for?

Strongly alkaline products are corrosive or irritating to skin and eyes and can damage sensitive materials such as aluminium, wood or lacquered surfaces. Wear gloves and safety glasses, test first in an inconspicuous spot and rinse well with clean water.

Source: manufacturer's product sheet (NL), as in the downloads for this product.