DETERFUG – Deep cleaner for acid-resistant floors

In stock
SKU: Deterfug | 1 liter
Regular price €9.15
Liter

pH-waarde: pH 1.5 ± 0.5 (strongly acidic)

Stubborn dirt, dull maintenance films or dirty joints?
DETERFUG cleans deep into the pores and texture of your floor.

This concentrated, mildly acidic cleaner from Faber Stone & Tile removes organic and inorganic soiling that ordinary maintenance products struggle to lift. Ideal for thorough cleaning of acid-resistant surfaces, indoors and outdoors.

Why choose DETERFUG?

  • Deep-cleaning action: loosens built-up dirt from pores and surface textures.
  • Removes maintenance films: tackles deposits caused by unsuitable cleaners or insufficient rinsing.
  • Cleans dirty joints: removes built-up dirt and helps bring back the original appearance.
  • Removes metal marks: suitable for metal marks on acid-resistant surfaces.
  • Concentrated formula: use neat or diluted, depending on the soiling.

Which surfaces?

DETERFUG is suitable for acid-resistant porcelain and ceramic tiles, granite, quartzite, slate, terracotta, cotto and clinker, among others.

Only use DETERFUG on acid-resistant materials. Do not use on acid-sensitive surfaces such as marble, limestone, travertine and Belgian blue stone. Always test first in an inconspicuous spot.

How to use DETERFUG

  1. Remove loose dirt and dust with a broom or vacuum cleaner.
  2. Apply the product to a dry surface that is not overheated. Work in small areas.
  3. Spread and scrub with a suitable brush, pad or single-disc machine.
  4. Leave to act for about 10 to 15 minutes, working the solution again in between. Add product if needed to keep the area wet.
  5. Add clean water, scrub again and pick up the dirty solution, preferably with a wet vacuum.
  6. Rinse thoroughly with clean water.

Dilution:

  • Stubborn surface films: use neat.
  • Heavy soiling: 1 part product to 2 parts water.
  • Periodic deep cleaning: 1 part product to 9 parts water.

For daily maintenance after deep cleaning, Faber recommends NEUGEL or ALGAFLOOR, depending on the material.

Safe use

Danger: causes severe skin burns and eye damage. Wear suitable protective gloves, protective clothing and eye or face protection. Do not breathe mist and do not mix the product with other chemicals. Protect adjacent surfaces and read the label and safety data sheet before use.

Not sure whether DETERFUG is right for your floor?
Contact Stone+ for advice on the right product and application.

First remove loose dirt and dust. Apply DETERFUG to a dry, acid-resistant surface and work in small areas. Use undiluted for stubborn surface films, 1 part product to 2 parts water for heavy soiling or 1 part product to 9 parts water for periodic deep cleaning.

Spread with a suitable brush, pad or single-disc machine. Leave to act for 10–15 minutes, scrub in between and do not let the solution dry. Then add clean water, scrub again and pick up the dirty solution, preferably with a wet vacuum. Rinse thoroughly with clean water.

Test beforehand in an inconspicuous spot. Do not use on acid-sensitive materials such as marble, limestone, travertine and Belgian blue stone. Wear suitable protective equipment and follow the label and the safety data sheet.

Danger: causes severe skin burns and eye damage. Wear protective gloves, protective clothing and eye or face protection. Do not breathe mist or spray. Ensure adequate ventilation. Do not mix DETERFUG with other chemicals.

In case of contact with the eyes: rinse immediately and cautiously with plenty of water for at least 15 minutes. Remove contact lenses if possible and continue rinsing. Call a doctor or Poison Centre immediately.

In case of skin contact: immediately take off contaminated clothing and rinse the skin with plenty of water or shower. If swallowed: do not induce vomiting and consult a doctor immediately.

Use only on acid-resistant surfaces and test beforehand in an inconspicuous spot. Protect adjacent materials. Store tightly closed in the original packaging in a cool, well-ventilated place, out of the reach of children. Prevent release into drains and surface water. Read the label and the safety data sheet before use.

GegevenWaarde en uitleg
  • pH of DETERFUG 1.5 ± 0.5 according to the product sheet.
  • Stated range 1 to 2.
  • Classification Strongly acidic.
  • Neutral pH value 7 at about 25 °C. DETERFUG is therefore not pH-neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does DETERFUG have this pH value?

Acidic cleaners dissolve mineral soiling, such as limescale, cement film, rust and lime soap. This requires a low pH: the lower the pH, the stronger the dissolving power.

What should you watch out for?

Acidic products attack calcareous materials, such as marble, limestone, travertine and some grouts. Only use the product on the recommended surfaces, test first in an inconspicuous spot and follow the safety instructions.

Source: manufacturer's product sheet (NL), as in the downloads for this product.

Hier kan je aanvullende productinformatie zoals gebruiksaanwijzingen, msds-fiches, video's, enz... vinden. Ook in andere talen.
Wij trachten dit zo actueel mogelijk te houden, maar als u vragen heeft, aarzel zeker niet om dan ons te contacteren.