DPS – deep-penetrating water-repellent protection for natural stone
Couldn't load pickup availability
Share on your social media
Protect your natural stone against water absorption while keeping its natural look.
DPS from Faber Stone & Tile is a solvent-based water-repellent impregnator. It penetrates deep into suitable stone and forms no film on the surface. The stone stays vapour-permeable.
DPS can also be used when renovating surfaces already installed that have previously been affected by moisture, salt efflorescence or oxidation. The surface must be clean, dry and suitably prepared before treatment.
Why choose DPS?
- High penetration: also penetrates compact and low-absorbing stones.
- Water-repellent protection: helps limit absorption of water and moisture.
- No surface film: keeps the stone vapour-permeable.
- UV resistant: suitable for indoor and outdoor applications.
- Non-yellowing: according to Faber's product information.
- Suitable for renovation: the deeply penetrated protection can remain after later sanding or polishing. Check the protection again after the work.
Which materials?
DPS is suitable for marble, limestone, travertine, granite, sandstone, slate, quartzite and porphyry, among others. Can also be used on suitable agglomerates, concrete, cement tiles, brick and cement-based joints.
Always carry out a test first to assess the absorption, colour and finish of the material.
How to use DPS
- Clean the surface and let it dry completely.
- Apply a generous, even coat with a brush, roller, lambswool applicator or cloth.
- On highly absorbent materials, apply a second coat if needed, wet-on-wet and crosswise.
- After the last coat, let the product penetrate for about 10–15 minutes.
- Wipe off any excess with a clean, dry cloth.
Consumption and drying time
- Coverage: about 10–15 m² per litre, depending on the absorption of the material.
- Drying: within about 1 hour according to the technical data sheet.
- Walkable: after about 4 hours according to the technical data sheet.
- Packaging: 1 litre and 5 litres.
Actual absorption and drying time depend on the surface and site conditions.
Important with damp problems
DPS protects against water absorption. Existing rust stains, salt residue or loss of shine may need additional cleaning or repair. Also have the cause of the damp problem investigated: an impregnator does not repair leaks or faulty connections.
Safe handling
Read the label and the full safety data sheet before use. Ensure good ventilation, wear suitable protection and keep the product away from heat, sparks and open flames.
Not sure whether DPS suits your stone? Contact Stone+ for advice on product choice and application.
Hier kan je aanvullende productinformatie zoals gebruiksaanwijzingen, msds-fiches, video's, enz... vinden. Ook in andere talen.
Wij trachten dit zo actueel mogelijk te houden, maar als u vragen heeft, aarzel zeker niet om dan ons te contacteren.
- DPS MSDS Stoneplus NL.pdf
- DPS Productfiche Stoneplus FR.pdf
- DPS Productfiche Stoneplus NL.pdf
- DPS Flyer A4 Stoneplus NL.pdf
- DPS MSDS Stoneplus DE.pdf
- DPS MSDS Stoneplus EN.pdf
- DPS MSDS Stoneplus FR.pdf
- DPS Productfiche Stoneplus DE.pdf
- DPS Productfiche Stoneplus EN.pdf
- DPS Productpresentatie Stone NL v1.0 07-11-2026.pdf