Epoxy Residue Remover – powerful cleaner for epoxy residue and grout haze

In stock
SKU: epoxy residue remover | 1 liter
Regular price €24.60
Liter

pH-waarde: pH 12 ± 0.5 (strongly alkaline)

Epoxy residue or a stubborn haze after grouting? Epoxy Residue Remover from Faber removes residue and films left behind after grouting or sealing with epoxy-based products. This ready-to-use alkaline cleaner also works on various synthetic residues, such as graffiti, paint and lacquer.

Suitable for targeted stain removal and post-installation cleaning, indoors and outdoors.

What can it remove?

  • Epoxy grout haze: the thin film or haze left behind after grouting.
  • Epoxy residue: surface residue of epoxy grouts and sealing products.
  • Stubborn synthetic residue: including graffiti, paint and lacquer, depending on the material and type of soiling.

Older, hardened residue can also be treated. The result and the contact time needed depend on the nature and thickness of the soiling.

The benefits

  • Ready to use: no need to dilute beforehand.
  • Powerful dissolving action on epoxy and synthetic residue.
  • Suitable for local treatment and larger areas.
  • Can be used indoors and outdoors.
  • Apply by hand or with a suitable cleaning machine.

Which surfaces?

Epoxy Residue Remover can be used on ceramic tiles, porcelain, granite, marble, limestone, travertine, slate, quartzite, concrete, terracotta and various stone agglomerates, among others.

Always test first in an inconspicuous spot or on an offcut. The finish and any existing treatment help determine suitability. On polished or glossy porcelain a shorter contact time may be needed.

How to use Epoxy Residue Remover

  1. Remove dust, sand and loose dirt. The surface must be dry and cool.
  2. Apply the product neat to a limited area.
  3. Leave to act for about 10–15 minutes for light residue, or 20–30 minutes for stubborn, hardened residue. Work in between with a suitable pad or brush and keep the surface covered with a thin layer of product.
  4. Add clean water and scrub to pick up the loosened soiling.
  5. Remove the cleaning liquid, preferably with a wet vacuum, and rinse thoroughly with clean water.

On delicate or polished surfaces use a suitable white pad. Let new grout and tile adhesive cure fully before treatment.

Working safely

Causes severe skin burns and eye damage. Wear suitable protective gloves, protective clothing and eye or face protection. Do not breathe mist, do not mix the product with other cleaning agents and protect adjacent surfaces. Read the label and safety data sheet before use.

Unsure about your surface or soiling? Ask Stone+ for advice on a suitable treatment.

1. Preparation: remove dust, sand and loose dirt. Work on a dry, cooled surface. Let new grout and tile adhesive cure completely. Protect adjacent surfaces.

2. Test beforehand: carry out a test in an inconspicuous spot or on an offcut. Check the suitability for the material, the finish and any existing treatments. Polished or glossy porcelain may need a shorter contact time.

3. Application: use Epoxy Residue Remover undiluted. Spread a thin, even layer over a limited area. On highly absorbent materials, work on a maximum of 4–5 m² at a time.

4. Contact time: about 10–15 minutes for light residue and 20–30 minutes for hardened or stubborn residue, depending on the preliminary test. Work the surface in between with a suitable pad or brush. Keep the surface covered with a thin layer of product during the treatment; add product if necessary.

5. Loosening and picking up: add clean water and work the surface with a pad, brush or single-disc machine. On delicate or polished surfaces, use a suitable white pad. Pick up the loosened soiling and cleaning liquid, preferably with a wet vacuum.

6. Rinsing: rinse thoroughly with clean water and remove all residue. Let it dry completely before repeating the treatment if needed. The surface can be used again as soon as it is dry.

Safety: wear suitable gloves, protective clothing and eye or face protection. Do not mix with other cleaning products. Read the label and the safety data sheet before use.

DANGER — Causes severe skin burns and eye damage (H314).

  • Wear suitable protective gloves, protective clothing and eye or face protection.
  • Avoid contact with skin and eyes. Do not breathe mist or spray. Ensure adequate ventilation.
  • Do not mix the product with other cleaning products.
  • Wash hands and face thoroughly after use. Keep out of the reach of children.

In case of contact with the eyes: rinse cautiously with water for several minutes. Remove contact lenses if possible and continue rinsing. Call a Poison Centre or doctor immediately.

In case of contact with skin or hair: immediately take off contaminated clothing and rinse the skin with water or shower. Call a Poison Centre or doctor immediately.

If swallowed: rinse mouth. Do not induce vomiting and consult a doctor immediately.

Store in the original, tightly closed packaging in a cool, dry place. Prevent undiluted product from entering drains or the environment.

Always read the label and the safety data sheet before use.

GegevenWaarde en uitleg
  • pH of EPOXY RESIDUE REMOVER 12 ± 0.5 according to the product sheet.
  • Stated range 11.5 to 12.5.
  • Classification Strongly alkaline (basic).
  • Neutral pH value 7 at about 25 °C. EPOXY RESIDUE REMOVER is therefore not pH-neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does EPOXY RESIDUE REMOVER have this pH value?

Alkaline cleaners break down grease, oil, wax, polymers and other organic dirt. The higher the pH, the stronger the degreasing and stripping effect.

What should you watch out for?

Strongly alkaline products are corrosive or irritating to skin and eyes and can damage sensitive materials such as aluminium, wood or lacquered surfaces. Wear gloves and safety glasses, test first in an inconspicuous spot and rinse well with clean water.

Source: manufacturer's product sheet (NL), as in the downloads for this product.