FABER 30 2.0 – Powerful deep cleaner and degreaser

In stock
SKU: Faber 30 | 5 liter
Regular price €34.75
Liter

pH-waarde: pH 11 ± 0.5 (strongly alkaline)

Does your floor stay dirty or greasy, even after cleaning?
Faber 30 2.0 is a concentrated alkaline cleaner for stubborn dirt, grease and rubber or tyre marks. Suitable for thorough cleaning of a wide range of surfaces, indoors and outdoors.

What is Faber 30 for?

  • Deep cleaning of heavily soiled floors.
  • Removing grease and caked-on everyday dirt.
  • Cleaning rubber and tyre marks.
  • Removing certain old wax, resin and polymer layers, after a prior test.

Which materials?

Suitable for natural stone such as marble, limestone, travertine and granite, ceramic tiles, porcelain, concrete and terracotta, among others.

Can also be used on certain composite, PVC, epoxy and polyurethane floors. Always check the existing finish or protective layer.

Test first in an inconspicuous spot. After drying, check the colour, shine and finish. The product can remove certain wax and protective layers.

Why choose Faber 30?

  • Powerful degreasing and deep cleaning.
  • Concentrated formula: dose according to the soiling.
  • Widely usable on suitable hard surfaces.
  • Apply by hand or with a suitable floor cleaning machine.

Which dosage should you use?

ApplicationDosage
Periodic degreasing1 part product + 6 parts water
Heavy grease soiling1 part product + 2 parts water
Removing suitable wax, resin or polymer layersNeat, according to the technical data sheet and after a test patch


How to use it

  1. Remove loose dirt. Vacuum or sweep the floor. Start on a dry surface that is not warm.
  2. Dilute and spread. Apply the chosen solution evenly. On highly absorbent floors work in small areas of no more than about 4–5 m².
  3. Leave to act for 10–15 minutes. Keep the surface wet and scrub in between with a suitable brush or pad.
  4. Add clean water. Scrub again to take up the loosened dirt into the solution.
  5. Remove the dirty solution. Preferably use a wet vacuum.
  6. Rinse thoroughly. Let the floor dry before using it again.

On polished or sensitive surfaces use a suitable soft white pad.

Safe use

Causes serious eye irritation. Wear safety glasses and suitable protective gloves. Ensure adequate ventilation and do not mix the product with other cleaning agents. Read the label and safety data sheet before use.

Unsure about your floor or soiling?

Stone+ will help you with the right product choice, dosage and method.

How do you use it?

Remove loose dirt. Vacuum or sweep the floor. Start on a dry surface that is not warm.

Dilute and spread. Apply the chosen solution evenly. On highly absorbent floors, work in small areas of no more than about 4–5 m².

Leave to act for 10–15 minutes. Keep the surface moist and scrub in between with a suitable brush or pad.

Add clean water. Scrub again to take the loosened dirt up into the solution.

Remove the dirty solution. Preferably use a wet vacuum.

Rinse thoroughly. Let the floor dry before using it again.

On polished or sensitive surfaces, use a suitable soft white pad.

Safety instructions – Faber 30 2.0

Warning: causes serious eye irritation (H319).

  • Wear safety glasses and suitable protective gloves. Avoid contact with eyes and skin.
  • Wash hands and face thoroughly after use. Do not eat, drink or smoke while working.
  • In case of eye contact: remove contact lenses if possible and rinse immediately with water for at least 15 minutes. Keep the eyelids open and consult a doctor.
  • In case of skin contact: take off contaminated clothing and wash the skin thoroughly with soap and water.
  • If swallowed: do not induce vomiting and consult a doctor immediately.
  • Store tightly closed in the original packaging, in a well-ventilated place and protected from direct sunlight.
  • Prevent spilled product from entering drains or the environment.

Read the label and the complete safety data sheet before use.

GegevenWaarde en uitleg
  • pH of FABER 30 2.0 11 ± 0.5 according to the product sheet.
  • Stated range 10.5 to 11.5.
  • Classification Strongly alkaline (basic).
  • Neutral pH value 7 at about 25 °C. FABER 30 2.0 is therefore not pH-neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does FABER 30 2.0 have this pH value?

Alkaline cleaners break down grease, oil, wax, polymers and other organic dirt. The higher the pH, the stronger the degreasing and stripping effect.

What should you watch out for?

Strongly alkaline products are corrosive or irritating to skin and eyes and can damage sensitive materials such as aluminium, wood or lacquered surfaces. Wear gloves and safety glasses, test first in an inconspicuous spot and rinse well with clean water.

Source: manufacturer's product sheet (NL), as in the downloads for this product.