HIDRO SST – water-repellent impregnator for natural stone

In stock
SKU: Hidro sst | 5 liter
Regular price €92.75
Liter

pH-waarde: pH 11 ± 0.4 (strongly alkaline)

Protect your natural stone against moisture absorption, ideally before installation.

HIDRO SST from Faber Stone & Tile is a ready-to-use water-based impregnator that penetrates deep into natural stone. The treatment reduces water absorption and helps prevent moisture-related problems such as yellowing, rust formation, spalling and salt efflorescence.

The product does not form a surface film, so the stone stays vapour-permeable. Suitable for indoor and outdoor use.

Why choose HIDRO SST?

  • Deep-penetrating protection against water absorption and rising damp.
  • Ideal as a pre-treatment of natural stone before installation.
  • No surface film: the stone stays breathable.
  • Easier maintenance because dirt adheres less.
  • Ready to use and water-based, described by Faber as VOC-free.

Which materials?

HIDRO SST is suitable for marble, granite, limestone, travertine, sandstone, slate, quartzite, porphyry, basaltina and suitable marble agglomerates, among others.

Always carry out a test first to assess suitability for the type of stone and finish.

Protection before installation

Pre-treatment helps protect the stone from the installation stage onwards. Depending on the chosen system, the top face and edges can be treated, or all six sides.

Always match the treatment to the adhesive and installation method. For a six-sided treatment with HIDRO SST, Faber prescribes high-performance adhesive or mechanical fixing. See the product data sheet or ask Stone+ for advice.

Also for stone already installed

HIDRO SST can also be applied after installation. The stone must be clean and as dry as possible. Moisture already present affects the result.

Existing yellowing or stains first need suitable cleaning or treatment: HIDRO SST protects the stone but does not remove these discolourations.

Use in brief

  1. Carry out a test, clean the stone and let it dry as well as possible.
  2. Apply an even coat neat with a brush, roller, lambswool applicator or cloth.
  3. Spread excess product after about 5–10 minutes, before it dries.
  4. For pre-treatment, wait at least 24 hours before installation. Protect a surface treated after installation from water and moisture while it dries.

Work at a surface temperature of +5 to +40 °C, never on wet or overheated stone.

Coverage and packaging

  • Coverage: about 10–15 m² per litre, depending on absorption and the total treated area. With six-sided treatment all treated sides count.
  • Packaging: 950 ml and 5 litres.

Read the full product data sheet and safety data sheet before use.

Need advice on your natural stone or pre-treatment? Contact Stone+.

HIDRO SST is ready to use. Do not dilute.

1. Preparation

Always carry out a test first in an inconspicuous spot or on a loose piece of stone. Remove dust and dirt and protect adjacent materials. The stone must be as dry as possible. Do not apply to wet or overheated surfaces. Work at a surface temperature of +5 to +40 °C. Let new adhesive and grout cure completely.

2. Pre-treatment before laying

First treat the top and edges evenly with a brush, roller, lambswool pad or cloth.

Spread excess product after about 5–10 minutes, before it dries. Do not leave any local build-up.

For six-sided treatment, let the top and edges dry for about 1–2 hours . Then turn the stone over and treat the underside in the same way.

Alternatively, for a six-sided treatment, tiles can be fully immersed for about 10–15 seconds. Spread the excess product immediately with a clean cloth.

Match the treatment to the laying system:

  • Six sides with HIDRO SST: use high-quality adhesive or mechanical fixing.
  • Five sides, top and edges: use medium- to high-quality adhesive.
  • Other treatment on the underside: have the combination of back treatment, adhesive or mortar assessed in advance.

Wait at least 24 hours before laying.

3. Treatment after laying

First remove existing yellowing or stains with an appropriate treatment. Let the stone dry as well as possible.

Apply HIDRO SST evenly and spread excess product after 5–10 minutes, before it dries. Remove residue with a white pad or damp cloth. For larger surfaces, a single-disc machine with a white pad can be used.

Highly absorbent stone, where the product is absorbed quickly without residue, may need a second coat. Moisture present in stone that has already been laid affects the result.

4. Drying and finishing

Let the product dry completely for about 24 hours. Protect a surface treated after laying against water and moisture during this period.

Stubborn dried residue can be loosened with a clean cloth or white pad moistened with HIDRO SST. Carefully pick up all residue.

Clean the tools with water after use.

Coverage: about 10–15 m² per litre, depending on absorption and the total treated surface area. For six-sided treatment, all treated sides count.

Read the complete product sheet and safety data sheet before use.

Warning – causes skin and eye irritation.

  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • P280: Wear protective gloves, eye protection and face protection.
  • P264: Wash hands and face thoroughly after working with this product.
  • P337+P313: If eye irritation persists: get medical advice.

Using it safely

Wear suitable chemical-resistant gloves, tight-fitting safety goggles and protective work clothing. Ensure adequate ventilation and avoid breathing mist. See section 8 of the safety data sheet for the choice of protective equipment. Do not eat, drink or smoke during use.

First aid

  • Eye contact: Remove contact lenses, if present and easy to do. Rinse immediately with plenty of water for at least 15 minutes, keeping the eyelids open. Get medical advice if symptoms persist.
  • Skin contact: Take off contaminated clothing and rinse the skin with plenty of water. Get medical advice if irritation persists. Wash clothing before reuse.
  • Inhalation: Move the person to fresh air. Seek medical advice immediately in case of breathing difficulties.
  • Ingestion: Get medical advice. Do not induce vomiting unless a doctor expressly advises it. Never give anything by mouth to an unconscious person.

Storage and waste

Store tightly closed in the original packaging, in a well-ventilated place and protected from direct sunlight. Keep away from acids. Prevent release into drains, soil or surface water. Dispose of product residue and contaminated packaging in accordance with the applicable regulations.

Read the label and the complete safety data sheet before use.

ClassificationpH valueApplies to HIDRO SST?
AcidicLower than 7No
Neutral7 at 25 °CNo
Alkaline / basicHigher than 7Yes: pH 11 ± 0.4
What does this mean?

The pH value indicates how acidic or alkaline an aqueous solution is. A neutral pH is 7 at 25 °C. According to the technical product sheet, HIDRO SST has a pH of 11 ± 0.4, which corresponds to a range of 10.6 to 11.4.

Why is HIDRO SST alkaline?

The alkaline pH is related to the composition. The safety data sheet mentions sodium silicate, an alkaline substance that contributes to this pH. HIDRO SST is a water-based impregnator for natural stone.

Use

The product is ready to use and must be applied undiluted. Wear suitable protective gloves and eye protection and follow the safety data sheet.