MA 90 V, solvent-based stain-resistant and strongly colour-enhancing treatment for natural stone, glossy

In stock
SKU: MA 90 V | 1 liter
Regular price €24.95
Verpakking

MA 90 V is a solvent-based, stain-resistant, colour-enhancing and
wet-look protective treatment for natural stone and highly absorbent materials.

MA 90 V is a stain-resistant, solvent-based colour enhancer with excellent protective properties for a semi-gloss to gloss finish on natural stone and materials with an unpolished finish and medium
to high absorption.

MA 90 V can give the treated surface a deep wet look, even on extremely absorbent materials.
At the same time it creates a semi-polished surface finish and a warm colouring that enhances the natural veining and the specific look of the surface.

MA 90 V offers excellent water-repellent and stain-resistant properties.
It is UV resistant, does not yellow over time and is suitable for indoor and outdoor surfaces.

Preparing and cleaning the surface

1. Clean the surface carefully and remove all dust and dirt present

2. Never apply MA 90 to wet or damp surfaces

3. Apply MA 90 to surfaces with a temperature between + 5° and + 40°C.

4. All adjacent surfaces that are not to be treated with the product must be masked off.

Execution

5. Apply an even, generous coat of product to a clean, dry surface with the tool of your choice. Make sure you create an even layer over the entire surface so that the whole area is covered.

6. Wait about 5 to 10 minutes and spread the excess product over the entire surface again. Using the same tool, make sure the product is again spread evenly and uniformly over the entire surface.

You may not need to do this on very absorbent surfaces.

7. No less than 4 to 6 hours after applying MA 90, but in any case on a completely dry surface, the polished effect of MA 90 can be buffed up by dry polishing. Carry out this operation with a standard single-disc machine (1.5 HP, 175 rpm) with a white pad, a lambswool pad or a wool-cotton attachment.

Alternatively, on tabletops, vertical surfaces or small areas, dry polishing can be done with an orbital machine and a hand disc, again with a white pad, lambswool pad or a wool-cotton cloth.

Drying time

8. The product dries quickly and in any case dries within 1 to 2 hours after application.

Opening to foot traffic

9. The surface can be opened to foot traffic 4 to 6 hours after the products have been applied...

  • H225 Highly flammable liquid and vapour
  • H304 Harmful in contact with skin. May be fatal if swallowed and enters airways.
  • H336 the product may cause drowsiness or dizziness.
  • EUH066 Repeated exposure may cause skin dryness or cracking
  • P210 Keep the product away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P271 Use the product only outdoors or in well-ventilated areas
  • P301+P310 If swallowed: alert the Poison Centre or a doctor immediately.
  • P331 Do not induce vomiting
  • P370+P378 In case of fire: use carbon dioxide, foam or dry chemical powder to extinguish
  • P403+P235 Store in a well-ventilated place. Keep cool
  • P405 Keep closed

There is no specific warranty.
If the product is used correctly, you will get an excellent shine on the treated surface.