MAR GEL PLUS – rust remover for marble, limestone and travertine

In stock
SKU: Mar Gel PLus | 0,5 liter
Regular price €36.05
Liter

pH-waarde: pH 8 ± 0.5 (slightly alkaline)

Rust stains on marble or other acid-sensitive stone need a suitable treatment. MAR GEL PLUS from Faber is a ready-to-use water-based gel that removes rust from the material, even when the stain has penetrated deeper.

The formula also penetrates compact, polished or brushed calcareous surfaces. Suitable for indoor and outdoor use.

Why choose MAR GEL PLUS?

  • Specially developed for rust on acid-sensitive materials.
  • Tackles surface and deeper-penetrated rust stains.
  • Ready to use: no dilution needed.
  • Easy to apply with a brush or spatula.

Which materials?

Marble, limestone, travertine, marble agglomerates, cement tiles, concrete, crackle-glaze ceramics and cement-based joints. Always test suitability on the actual material and finish.

How to use it

  1. Carry out a test and remove dust and dirt. Work on a dry or at most slightly damp surface.
  2. Cover the rust stain completely with MAR GEL PLUS and let it act under control.
  3. Carefully pick up the gel and all product residue.
  4. Then apply OXIDANT to remove the purple reaction colour. Leave OXIDANT to act at least twice as long as MAR GEL PLUS.
  5. Rinse with water and let dry completely.

OXIDANT is part of the after-treatment. The reaction with rust produces a purple discolouration. Apply both products one after the other and never mix them.

The maximum recommended contact time for MAR GEL PLUS is one hour per application. Beyond 30 minutes, loss of shine may occur depending on the stone.
Read the technical data sheet and safety data sheet before use.

Unsure about the right approach for your rust stain? Ask Stone+ for advice.

Instructions for use

1. Carry out a test Test in an inconspicuous spot or on a loose piece of material. Check the colour and shine.

2. Prepare the surface Remove dust and dirt. Work on a dry or at most slightly damp surface. Protect adjacent materials. Remove any existing wax layers beforehand.

3. Apply MAR GEL PLUS Use undiluted. Cover the entire rust stain with plenty of gel, using a brush or spatula. Work on a cool surface, out of direct sunlight.

4. Leave to act in a controlled way Guideline times: 5–20 minutes for light surface rust and 30–45 minutes for deeper stains. Maximum one hour per application. Check in between. More than 30 minutes may cause loss of shine.

5. Remove the gel Carefully pick up all gel and product residue with absorbent paper or cloths.

6. Post-treat with OXIDANT Use it to remove the purple reaction colour. Follow the OXIDANT product sheet and leave it to act at least twice as long as MAR GEL PLUS: for example at least 40 minutes after 20 minutes of MAR GEL PLUS.

7. Rinse and let dry Rinse with water and let dry completely before walking on it and making a final assessment. Repeat the complete treatment if necessary.

Never mix the two products. Read the product and safety data sheets before use.

Warning

  • H302: Harmful if swallowed.
  • H317: May cause an allergic skin reaction.

Using it safely

  • Wear suitable chemical-resistant gloves, tight-fitting safety goggles and protective work clothing.
  • Avoid contact with skin and eyes. Do not breathe vapours and mist and ensure adequate ventilation.
  • Do not eat, drink or smoke during use.
  • Wash hands and face thoroughly after use.
  • Take off contaminated clothing and wash it before reuse.
  • Never mix MAR GEL PLUS with other chemicals. Only apply OXIDANT after all MAR GEL PLUS residue has been carefully removed.

In case of contact or an accident

  • Skin contact: remove contaminated clothing, rinse thoroughly immediately and consult a doctor.
  • Eye contact: remove contact lenses if possible. Rinse immediately and for a long time with plenty of water, keeping the eyelids open, and consult a doctor straight away.
  • Ingestion: consult a doctor immediately. Do not induce vomiting without express medical advice.
  • Inhalation: move to fresh air and get medical help immediately.

Storage and disposal

Store tightly closed in the original packaging, in a cool, dry and ventilated place. Avoid overheating. Prevent product residue from entering drains, soil or surface water.

Read the label and the complete safety data sheet before use.

GegevenWaarde en uitleg
  • pH of MAR GEL PLUS 8 ± 0.5 according to the technical data sheet (TDS).
  • Stated range 7.5 to 8.5.
  • Classification Slightly alkaline (basic).
  • Neutral pH value 7 at about 25 °C. MAR GEL PLUS is therefore not pH-neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does MAR GEL PLUS have this pH value?

Rust is often removed with acids, but acids attack marble, limestone and travertine. That is why MAR GEL PLUS is not acidic: it removes rust with a slightly alkaline formula, so that calcareous stone is not attacked.

What should you watch out for?

Always follow the instructions for use: use the recommended dosage and test first in an inconspicuous spot.

Source: manufacturer's technical data sheet (TDS).