OXIDANT - Stain remover for yellowing, damp stains and tannin

In stock
SKU: Oxidant | 1 liter
Regular price €14.40
Liter

pH-waarde: pH 6.5 ± 0.5 (neutral)

Stubborn discolouration in natural stone or tiles? OXIDANT from Faber Stone & Tile is a water-based stain remover for yellow discolouration, dark damp-related stains, and tannin and nicotine stains, among others.

The product works with active oxygen and, according to Faber, is also suitable for delicate materials such as polished marble and other acid-sensitive natural stones. Always check suitability first with a test in an inconspicuous spot.

Which stains can you treat?

  • Yellowing caused by water infiltration or rising damp.
  • Dark discolouration caused by water absorption in natural stone.
  • Stubborn tannin stains, for example from leaves, wood or tea.
  • Nicotine stains.
  • Coloured residual stains left after treatment with NO MAC GEL.
  • Purple residual discolouration after rust removal with MAR GEL PLUS.

Which materials?

OXIDANT is suitable for marble, limestone, travertine, granite, sandstone, concrete and various ceramic tiles, among others. You can use it indoors and outdoors. The type of stone, the finish and any existing protective layer help determine the right approach.

Why choose OXIDANT?

  • Ready to use: apply neat.
  • Targeted stain treatment: let the product act on the discolouration under control.
  • Widely applicable: suitable for various stone-like materials.
  • Also for local or vertical applications: can be thickened with FABER POULTICE following Faber's instructions.

How to use it

  1. Remove dust and dirt. Let the surface dry or be at most slightly damp.
  2. Make a test patch first.
  3. Apply a sufficiently thick, even layer of OXIDANT over the whole stain.
  4. Leave to act according to the type of stain and the technical data sheet.
  5. Remove all product residue, clean with water and assess the result once fully dry.

Tannin and nicotine stains usually need 2 to 8 hours of contact time. For damp-related discolouration the guideline is 8 to 24 hours. Deep or older stains may need repeated treatment.

Good to know

OXIDANT treats the discolouration.
A leak or other active source of moisture must be dealt with separately to help prevent new stains.

Do not mix with other cleaning products. The product causes serious eye irritation. Read the technical data sheet and safety data sheet before use and wear the prescribed protection.

Unsure about the right treatment?
Send Stone+ photos of the stain, the type of stone and information about previous treatments. We are happy to help you with product choice and application.

How do you use it?

Remove dust and dirt. Let the surface dry, or at most leave it slightly damp.

Make a test area first.

Apply a sufficiently thick, even layer of OXIDANT over the entire stain.

Leave to act according to the type of stain and the technical data sheet.

Remove all product residue, rinse with water and assess the result after complete drying.

Tannin and nicotine stains usually need a contact time of 2 to 8 hours. For moisture-related discolouration, the guideline time is 8 to 24 hours. Deep or older stains may need a repeated treatment.

Safety instructions OXIDANT

Warning: causes serious eye irritation (H319).

  • Wear suitable protective gloves and safety glasses.
  • Avoid contact with eyes and skin. Wash hands thoroughly after use.
  • Never mix OXIDANT with other cleaning products or chemicals.
  • In case of eye contact: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Consult a doctor if irritation persists.
  • Store tightly closed, cool and dry.

Always read the label and the complete safety data sheet before use.

GegevenWaarde en uitleg
  • pH of OXIDANT 6.5 ± 0.5 according to the product sheet.
  • Stated range 6 to 7.
  • Classification Neutral.
  • Neutral pH value 7 at about 25 °C. OXIDANT is therefore close to neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does OXIDANT have this pH value?

OXIDANT works by oxidation (based on hydrogen peroxide) and not with an acid or an alkali. This allows the pH to stay close to neutral.

What should you watch out for?

Always follow the instructions for use: use the recommended dosage and test first in an inconspicuous spot.

Source: manufacturer's product sheet (NL), as in the downloads for this product.