Faber BS H2O – Protection against rising damp and salt efflorescence in natural stone

In stock
SKU: BS H2O | 1 liter
Regular price €19.70
Verpakking

pH-waarde: pH 9.5 (alkaline)

Moisture drawn into natural stone from the underside can cause salt efflorescence and other damp problems. Faber BS H2O is a water-borne protective product applied to the underside of tiles and slabs before installation.

It forms a protective layer that limits capillary moisture absorption while keeping the stone breathable. The treatment also supports good adhesion between the treated stone and the installation adhesive.

Benefits

  • Protects against rising damp from the underside.
  • Helps prevent salt efflorescence and damp-related damage.
  • Keeps the natural stone breathable.
  • Supports good adhesion during installation.
  • Ready to use and water-based.
  • Suitable for indoor and outdoor applications.

What is it for?

BS H2O is suitable for pre-treating marble, granite, limestone, travertine, slate, sandstone and quartzite, among others. It is applied to the underside that will later be in contact with the installation adhesive.

Part of a complete pre-treatment

Always use BS H2O together with a suitable Faber pre-treatment for the top face and the four edges of the stone. The choice of that protection depends on the type of stone and the application.

Easy to apply

First treat the top face and edges and let them dry. Then apply one even coat of BS H2O neat to the whole clean, dry underside with a brush, roller or lambswool applicator.

The material can be moved after about 15–30 minutes. Wait at least 24 hours before installation. Test first on a sample.

Practical information

  • Coverage: about 10–15 m² per litre, depending on the surface.
  • Packaging: 1 litre and 5 litres.
  • Application temperature: +5 to +40 °C.
  • Cleaning tools: with water after use.

Need advice for your natural stone?
Contact Stone+ for the right combination of pre-treatment and protection.

Instructions for use BS H2O

Suitable for: the back of tiles and slabs in marble, travertine, limestone, granite, quartzite, slate, sandstone, lava stone, agglomerated marble and concrete tiles. Indoors and outdoors. Protects against rising damp, salts and efflorescence.

Preparation

  1. First carry out a test in an inconspicuous spot or on an offcut.
  2. First treat the top and sides with the appropriate Faber protector and let it dry.
  3. Lay the tiles face down on a clean, dry work surface.
  4. Clean the back thoroughly: dust-free, clean and dry.
  5. Work between +5 °C and +40 °C, not on wet or warm surfaces.

Application

  1. Ready to use, do not dilute.
  2. Apply one coat to the entire back with a brush, roller or lambswool applicator.
  3. Let dry for 15 to 30 minutes before moving the tiles.
  4. Lay only after at least 24 hours.

Consumption: 10 to 15 m² per litre.

Tools: clean with water.

Storage: cool, dry and tightly closed. Shelf life 36 months.

Note: always combine with a Faber protector on the top and sides. Not classified as hazardous, but contains isothiazolinones: may produce an allergic reaction. Wear gloves and safety glasses and ventilate well. SDS available on request.

  • Read the label and the safety data sheet before use.
  • May produce an allergic reaction. Contains 1,2-benzisothiazol-3(2H)-one and a reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1).
  • Avoid contact with skin and eyes. Wear suitable chemical-resistant gloves, protective clothing and tight-fitting safety goggles.
  • Ensure adequate ventilation. Do not eat, drink or smoke during use. Wash hands after use.
  • In case of eye contact: remove contact lenses if possible, rinse immediately and for a long time with water and consult a doctor straight away.
  • In case of skin contact: remove contaminated clothing, rinse the skin thoroughly with water and consult a doctor.
  • If swallowed: consult a doctor immediately. Do not induce vomiting.
  • Store in the original, tightly closed packaging, in a well-ventilated place and protected from direct sunlight.
  • Prevent the product from entering drains, soil or surface water. Absorb spilled product with inert absorbent material and dispose of residue in accordance with local regulations.

Safety data sheet available on request.

GegevenWaarde en uitleg
  • pH of BS H2O 9.5 according to the Stone+ product data.
  • Classification Alkaline (basic).
  • Neutral pH value 7 at about 25 °C. BS H2O is therefore not pH-neutral.
What does pH mean?

The pH indicates how acidic or alkaline an aqueous solution is. At about 25 °C, a pH below 7 is acidic, a pH of 7 is neutral and a pH above 7 is alkaline (basic).

Why does BS H2O have this pH value?

The pH is determined by the chemical composition of the product. The source states the value, but does not explain why exactly this pH was chosen.

What should you watch out for?

Alkaline products can irritate skin and eyes. Wear gloves and follow the instructions for use and the safety instructions.

Source: Stone+ product data.

Hier kan je aanvullende productinformatie zoals gebruiksaanwijzingen, msds-fiches, video's, enz... vinden. Ook in andere talen.
Wij trachten dit zo actueel mogelijk te houden, maar als u vragen heeft, aarzel zeker niet om dan ons te contacteren.