TCB 12

In stock
SKU: TCB 12 | 5 kg
Regular price €57.75
Verpakking

pH-waarde: pH 2.5 ± 0.4 (strongly acidic)

TCB 12 is a quick and easy-to-apply polishing cream for polishing and maintaining granite, quartz and ceramic porcelain surfaces.

TCB 12 is a water-based polishing cream developed for application on hard, compact surfaces such as granite, quartz and ceramic porcelain.
Thanks to its quick and easy application, the product is an ideal solution for keeping the shine on large floor areas, where polishing and maintenance are generally difficult.
Thanks to the innovative formulation of TCB 12, this treatment is fast, effective and long-lasting.

TCB 12 gives the treated surface excellent resistance to foot traffic and remarkable dirt and stain repellency, making routine floor maintenance simpler and faster.

TCB 12 does not change the original grip and slip resistance of the floor.
TCB 12 can replace the last stages of the mechanical polishing process with excellent results, as it replaces several polishing grits, giving the treated floor a higher shine than mechanical polishing alone, while saving time, water and energy.
Thanks to its easy application and quick use, TCB 12 can be used as a single solution to maintain or restore surfaces that have lost some shine through wear, or as the final step in a longer gloss process with STAR SHINE, or to preserve the look of a floor previously polished with STAR SHINE.

Preparing and cleaning the surface

1. Clean the surface carefully and remove all dust and dirt present.

2. We recommend applying the product in stages, on areas of about 1 m2 at a time.

3. Never apply TCB 12 to wet surfaces. TCB 12 can be used on slightly damp surfaces; therefore make sure the surface to be treated is as dry as possible.

4. Apply TCB 12 to surfaces with a temperature between +5 and +40°C.

5. All adjacent surfaces that are not treated with the product must be protected.

Application

6. Pour a small amount of product directly onto the surface to be polished. In general, about 2/3 of a scoop of product is enough to polish an area of 1 m2.

7. Once the product has been poured out, apply it to the surface with the single-disc machine, fitted with a white pad and set to 150 to 200 revolutions per minute.

machine with concentric movements to spread the product evenly over the entire section to be treated.

section to be treated.

8. Continue polishing the same section until the product has dried completely (dry buffing technique), making sure the movements extend outwards from the centre of the section so that the entire surface is covered evenly.

9. Move on to the next section and repeat the polishing treatment process as described above.

For a better shine, or to increase the sealing effect on the material and thereby its resistance to dirt, repeat the application of the product.

dirt, repeat the application of the product using the same method as described above. In general, we recommend treating the same area with 1 or 2 applications of the product, as needed. The formulation of the product will not cause overlap marks, and once maximum shine has been reached, no marks will be visible.

shine has been reached, there will be no differences or defects between the various areas treated separately.

  • H319 Causes serious eye irritation.
  • P264 Wash thoroughly after working with this product.
  • P280 Wear protective gloves/protective clothing/eye protection/face protection.
  • P305+P351+P338 lenses, if present and easy to do. Continue rinsing.
  • P305+P351+P338 IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses

There is no specific warranty.
If the product is used correctly, you will be able to clean your floor perfectly every day.
The product will not leave any residue on the floor if you use the recommended ratios.